Home > Engine Oil & Diff Coolers > Aux Pumps & Related Parts >

Mocal / Tilton Oil Circulation Pump
Mocal/TiltonOil Circulation Pump - Electric



Product Details
Mocal/Tilton standard fluid pump is well suited for circulating oil and differential cooling systems. They can also be used for other applications like circulating coolant for water radiators, intercoolers and driver cool suits. Mocal/Tilton motors utilize ball bearing drive throughout an integral cooling fan for long life. The pump is a positive displacement design which is self priming and can be located up to 8 ft above fluid/feed. Pump head can be indexed 90 degrees for convenient fluid connection. High temperature capable up to 285 degrees using buna diaphragm/seals.

Tech Specs.
  • ŒFlow rate 1.0-2.0 GPM and up to 50 psi. working pressure
  • ŒPositive displacement - flow is proportional to motor speed
  • ŒSelf Priming and can be run dry without harm
  • Incorporated non fluid contact bypass valve (50 psi) prevents over pressure damage (discharge not differential pressure)
  • 285F temp rating
  • Œ3/8" NPT female fluid connections
  • ŒRubber-isolated mounting
  • Can be mounted in any position
  • Intermittent duty rated: cycle on/off as required manually or
  • incorporate temperature switch for automatic pump control
  • Recommended filter: 40-50 mesh (400-250 micron) filter
  • Dimensions: 7.62" x 3.4" x 3"
  • Weight: 3.75 lbs
  • Electrical: 12 volt with 8 amp maximum (3-4 amp nominal)
  • 10 amp fuse recommended.

Be the first to share your knowledge of this product. Write A Review