Home > Solid Bushings & Mounts >

Front Control Arm Bushings Delrin- Offset BMW E30 E36 & Z3
Ireland Engineering Front Control Arm Bushings Delrin- Offset BMW E30 E36 & Z3



Product Details
These Ireland Engineering Delrin offset front control arm bushings fit the E30 325, M3 and E36 chassis. These bushings have the hole off-center to give your car a little more caster, and camber. The offset style bushing came standard on E30 M3s and the 1995 E36 M3, but will work with any E30, E36, or Z3. These are very stiff and take out the slop afforded by the stock rubber bushing.

These bushing are intended for track cars. Please measure the size of your control arm pin area that is installed in to these bushing before ordering. Typically they are 20mm +/- but some control arms vary greatly.

Tech Tip:
  • During installation we recommend drilling and tapping a bolt into the metal lollipop to prevent the bushing from rotating. This will help keep the offset bushin located where it needs to be.
Fits the Following Vehicles
  • 1982 - 1992 BMW E30 3 Series
  • 1988 - 1991 BMW E30 M3
  • 1992 - 1995 BMW E36 3 Series
  • 1995 - 1999 BMW E36 M3
  • 1995 - 1999 BMW Z3 Coupe or Roadster
  • 1995 - 2002 BMW Z3M M Coupe or M Roadster

Be the first to share your knowledge of this product. Write A Review